LEN-2

ZENIX SERIES · INDOOR BLE RSSI SCANNER

ZENIX LEN-2 Indoor BLE RSSI Gateway & Scanner

Real-time beacon and tag detection, proximity location and environmental sensor data from one PoE or Wi-Fi connected device.

BLE 5.x Scanner protocol
3–5 m Typical proximity accuracy
Up to 100 m Detection range
4 + motion Temperature, humidity, pressure, TVOC + motion
PoE + Wi-Fi 802.3af · 2.4 GHz b/g/n
IP54 Dust- and splash-protected enclosure
SKU: 101-01-01-011-01-1
  • CE
  • Works with Sentrax Solix or your own MQTT broker
  • Wall or ceiling mount

*Typical values. Signal propagation depends heavily on environmental conditions, layout and deployment design.

Overview

The ZENIX LEN-2 is an advanced BLE Gateway & Scanner designed for real-time beacon tracking, sensor data collection, and indoor positioning across Smart Buildings, Healthcare, and Industrial environments. Featuring PoE and Wi-Fi connectivity, an external antenna for extended indoor coverage, and an embedded processor powered by Sentrax’s advanced BLE scanning firmware, it efficiently collects sensor and location data from nearby beacons. Its compact design supports easy wall or ceiling installation.

Beacon tracking and indoor positioning in one compact gateway

  • Extends indoor coverage, so beacons are picked up across larger spaces.

  • Connects over PoE or Wi-Fi, to fit the way each site is set up.

  • Runs Sentrax’s advanced BLE scanning firmware to collect sensor and location data efficiently.

  • A compact design that installs easily on a wall or a ceiling.

Desk sensor · 22.4 °CRoom tag · Level 2, Zone BBed 14 · Ward BInfusion pump · Room 3Pallet 0482 · Dock 2Machine sensor · 61 °C External antenna

Why CHOOSE ZENIX LEN-2?

Proximity Tracking and Room Sensing in One Device

ZENIX LEN-2 provides reliable real-time beacon detection, asset and person proximity location visibility, and environmental sensor data within its coverage area. 

3–5 m Proximity Accuracy

Real-time indoor proximity positioning with meter-level tracking accuracy. .
Typical, environment-dependent

PoE & Wi-Fi Connectivity

RJ45 Ethernet with PoE 802.3af or 2.4 GHz Wi-Fi (b/g/n), with a 12 VDC adapter as a power option.
PoE 802.3af · Wi-Fi · 12 VDC

Smart BLE Filtering

Advanced beacon filtering for improved scanning performance and reduced noise. Beacon PDU extraction passes tag data through.
Sentrax BLE scanning firmware

Remote Configuration

Configure devices, update firmware and manage settings remotely. Supports remote tag configuration and update.
Configuration Portal

Easy Installation

Compact IP54 enclosure with a wall or ceiling mount.
IP54 · 125 × 125 × 29 mm · 166 g

Built-in Environmental Sensing

Temperature, humidity, pressure and TVOC sensing plus motion detection, alongside beacon scanning.
4 sensors + motion detection

Built-in sensing

Know Where It Is. Know What the Room Is Like.

Beyond beacon scanning, ZENIX LEN-2 reports conditions at the point of installation, so one device gives you location and environmental visibility.

  • Location and room conditions from one device
  • Motion detection adds presence context to tracking
  • Data goes to Sentrax Solix or your own MQTT broker

Source: ZENIX LEN-2 Device Specifications V2.5

Temperature

0–60 °C
Is the room within range?

Humidity

0–100 %RH
Is the climate right for stock and equipment?

Pressure

0.3–1.2 bar
How is ambient pressure trending?

Air Quality (TVOC)

1–500 VOC points
How is the air in the room?

Motion Detection

Presence context
Is the space in use?

How it works

From Beacon Signal to Application Data in Four Steps

ZENIX LEN-2 sits between your BLE beacons and tags and the software your teams use.

STEP 1

Beacons Broadcast

BLE beacons and tags on assets and people advertise their ID and status.

STEP 2

ZENIX Scans & Filters

LEN-2 measures RSSI, applies Sentrax smart BLE filtering, extracts beacon PDUs and adds its own sensor readings.

STEP 3

Data Is Delivered

Over PoE Ethernet or Wi-Fi via MQTT¹, over a TLS-secured connection with redundant broker support.

STEP 4

Your Applications Use It

The Sentrax Solix platform, or your own application, turns location and sensor data into action.

1 MQTT can be configured to send data to the local/client’s own broker.

ZENIX Configuration Portal
Deployment & management

Install Once. Manage Remotely.

  • Wall or ceiling mount. Listed accessories: DC 12 V/1.5 A adapter, PoE communication cable, external antenna, wall/ceiling mount and mounting screws.
  • Embedded Configuration Portal. Check device status, change parameters, back up and restore configuration, and upgrade firmware.
  • Remote tag management. Configure and update tag devices remotely.
  • On-site checks. Red power LED, green status LED and a user button.
Applications

Where ZENIX LEN-2 Is Used

Proximity tracking and environmental monitoring across indoor sites. Datasheet application areas: indoor localization, indoor navigation, location-based services, and asset & logistics tracking.

Technical specifications

ZENIX LEN-2 Specifications

Download datasheet

General

Device type
BLE 5.x scanner and gateway
Material · colour
ABS · off-white
Dimensions
125 × 125 × 29 mm
Weight
166 g
Protection
IP54
Mounting
Wall or ceiling mount

Radio & data

Protocol · Frequency
BLE 5.1 · 2.4 GHz
Antenna
Internal and external (optional)
Rx sensitivity
−70 to −82 dBm (internal antenna); up to −92 dBm (external antenna, optional)
Range
Up to 100 m2
Processing
Smart BLE filtering; beacon PDU extraction

Environmental sensors

Temperature
0–60 °C
Humidity
0–100 %RH
Pressure
0.3–1.2 bar
TVOC
1–500 VOC points
Motion
Motion detection

Connectivity & software

Wired
RJ45 Ethernet (PoE)
Wireless
Wi-Fi 2.4 GHz b/g/n
Platform
Sentrax Solix platform, MQTT1
Data security
TLS-secured connection; redundant broker support
Management
Embedded Configuration Portal; remote tag configuration & update

Power & environment

Power options
RJ45 PoE 802.3af; DC adapter 12 VDC
Supply rating
3 W
Operating temperature
0 °C to 60 °C
Operating humidity
90%

Interfaces & compliance

Interfaces
1 user button, 1 red power LED, 1 green status LED
Accessories
DC 12 V/1.5 A adapter, PoE communication cable, external antenna, wall/ceiling mount, mounting screws
Certifications
CE; FCC³
Recycling
WEEE, Directive 2012/19/EU

1. Can be configured to send data to the local/client’s MQTT broker.
2. Signal propagation depends heavily on environmental conditions.
3. Pending. Caution: risk of fire if power of an incorrect type or voltage is supplied. The antenna port is output only.

Complete Your System

ZENIX LEN - 1

ZENIX LEN-1

The same scanner family without environmental sensing

White circular hub with a small side button and a gray interlocking-link logo on top.

NODIX CEN-1

Battery-powered BiLink relay anchor for room-level tracking

PINIX BLE Tags

Asset and people tags that pair with ZENIX

Monitor displaying a dashboard UI with a left navigation rail and grid of floor status panels color-coded by status.

SOLIX RTLS Platform

RTLS and IoT platform for asset, people and sensor tracking

Resources

Downloads & Documentation

User Guide

Download PDF

Certificates

Download Certificates

FAQ

Questions Buyers Ask

Can’t find your answer? Our team can review your requirements.

Both are BLE 5.x RSSI scanners with PoE and Wi-Fi in the same 125 × 125 × 29 mm IP54 enclosure. LEN-2 adds temperature, humidity, pressure and TVOC sensing, motion detection and beacon PDU extraction. Its supply rating is 3 W, against 2.5 W for LEN-1.

Temperature (0–60 °C), humidity (0–100 %RH), pressure (0.3–1.2 bar) and TVOC (1–500 VOC points), plus motion detection.

LEN-2 provides proximity positioning with a typical accuracy of 3–5 m. Results depend on the environment, layout and deployment design.

Up to 100 m, depending heavily on environmental conditions. Rx sensitivity is −70 to −82 dBm with the internal antenna and up to −92 dBm with the optional external antenna. 

Yes. LEN-2 sends data to the Sentrax Solix platform over MQTT and can be configured to use your local or own MQTT broker. It supports redundant brokers and a TLS-secured connection.

Over RJ45 PoE (802.3af) or a 12 VDC adapter, with a 3 W supply rating. It mounts on a wall or ceiling; a DC 12 V/1.5 A adapter, PoE cable, external antenna, mount and screws are listed accessories.

Yes. The embedded Configuration Portal shows device status and lets you change parameters, back up and restore settings and upgrade firmware. Tag devices can also be configured and updated remotely.

CE. FCC certification is pending.

Plan Your ZENIX Deployment

Request a quote or discuss your integration requirements. Tell us about your site, the number of rooms and what you need to track.

  • Reply within [1 business day]
  • Layout and device-count proposal for your site
  • Volume and partner pricing

    Enquiry Form


    Name

    Email

    Phone

    Country

    Company Name

    Industry

    How can we help?