View Categories

Quick Start Guide

1 min read

1. Prerequisite  #

  • Make sure that the router or switch that you are using have an active internet connection. 
  • If you are using your own MQTT broker then make sure it is working. 
  • Make sure that port 1883 is open. 

2. Introduction  #

2.1 Accessory List  #

  1. 12V - 2A Power Supply 
  2. Ethernet Cable - Blue/Grey color (POE)  
  3. Mounting Bracket - Mount product to ceiling/wall 

2.2 Hardware Description  #

  1. Gateway Status LED 
  2. Gateway Power LED 
  3. POE Port  
  4. USB Power OUT 
  5. AOA Power LED 
  6. AOA Status LED 
  7. Reset Button 
  8. DC 12V IN 
  9. Wall Mount bracket 
  10. Serial Sticker 
ZENIX LON-2 Front View
Figure 1: ZENIX LON-2 Front View #
ZENIX LON-2 Back View ZENIX LON-2 Installation
Figure 2: ZENIX LON-2 Back View and Installation  #

3. Power using 12V Adapter  #

ZENIX LON-2 Wiring using LAN and 12V Adapter
Figure 3: ZENIX LON-2 Wiring using LAN and 12V Adapter  #

3.1 POE Injector  #

ZENIX LON-2 Wiring using POE Adapter
Figure 3.1: ZENIX LON-2 Wiring using POE Adapter  #

3.2 POE Switch  #

ZENIX LON-2 Wiring using POE Switch
Figure 3.2: ZENIX LON-2 Wiring using POE Switch  #

4. Device Status  #

After 2 to 5 seconds ZENIX LON-2 Power LED will turn ON, indicating that device is now booting up. 

Now wait for 1 to 2 minutes until the device gets boots up. Following is the status of device indicated via Gateway Status LED on ZENIX LON-2. 

Status LED (Green LED) 

Behavior 

Description 

OFF 

OFF 

System Booting Up

Blinking 

3s ON, 3s OFF 

Connecting to Internet 

Blinking 

1s ON, 1s OFF 

Connecting to USB 

ON 

ON

Connected 
Updated on 10/31/2025

What are your Feelings

  • Happy
  • Normal
  • Sad

Powered by BetterDocs